Klipsch Klipsch/Denon RF-52II AVR-2311 Home Theater System Package - Black

This Bundle Includes:

• (2) Klipsch RF-52 II Reference Series II Floorstanding Loudspeaker - Black
• (1) Klipsch RC-52II Reference Series II Center Channel Loudspeaker - Black
• (2) Klipsch RS-42II Reference II Wide Dispersion Surround Speaker - Black
• (1) Klipsch SW-112 12" Powered Subwoofer
• (1) Denon AVR-2311 7.2 Receiver

RF-52II Overview

• Remarkable balance of performance and value
• Fills medium to large rooms with dynamic sound reproduction
• Equally impressive with music and movies
• Highly efficient design produces more output using less energy
• Accurate, non-fatiguing sound provides hours of listening pleasure
• Plays louder with less distortion than the competition
• Enhanced 1" titanium horn-loaded tweeter, dual high-output 5.25" woofers
• Dimensions: 37.6" H x 6.75" W x 14.25" D
• Beautiful wood-grain vinyl veneer cabinet

RF-52II Specifications

• FREQUENCY RESPONSE 36Hz-24KHz ± 3dB 
• POWER HANDLING 100W RMS / 400W Peak 
• SENSITIVITY 96dB @ 2.83V / 1m 
• NOMINAL IMPEDANCE 8 ohms compatible 
• HIGH FREQ CROSSOVER 1700Hz 
• HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression driver mated to 90° x 60° square Tractrix® Horn 
• LOW FREQUENCY DRIVERS Dual 5.25" (13.3cm) Cerametallic™ cone woofers 
• ENCLOSURE TYPE Bass-reflex via rear-firing port 
• INPUTS Dual binding posts / bi-wire / bi-amp 
• HEIGHT 36.9" (93.8cm) with feet 
• WIDTH 6.8" (17.2cm) 
• DEPTH 14.4" (36.5cm) with grille 
• WEIGHT 38.5lbs (17.5kg) 
• FINISHES Black Ash & Cherry woodgrain vinyl 
• BUILT FROM 2010

RC-52II Overview

• Remarkable balance of performance and value
• Delivers articulate dialogue and surprising dynamics
• Highly efficient design produces more output using less energy
• Magnetically shielded drivers prevent TV interference
• Enhanced 1" titanium horn-loaded tweeter, dual 5.25" high-output woofers
• Dimensions: 6.75" H x 20.5" W x 10.5" D
• Tiltable feet for placement above/below seated ear height
• Beautiful wood-grain vinyl cabinet

RC-52II Specifications

• FREQUENCY RESPONSE 67Hz-24KHz ± 3dB 
• POWER HANDLING 125W RMS / 500W Peak 
• SENSITIVITY 96dB @ 2.83V / 1m 
• NOMINAL IMPEDANCE 8 ohms compatible 
• HIGH FREQ CROSSOVER 1600Hz 
• HIGH FREQUENCY DRIVERS 1" (2.54cm) Titanium diaphragm compression driver mated to 90° x 60° square Tractrix® Horn 
• LOW FREQUENCY DRIVERS Dual 5.25" (13.3cm) Cerametallic™ cone woofers 
• ENCLOSURE TYPE Bass-reflex via dual front-firing ports 
• INPUTS Single binding posts 
• HEIGHT 6.5" (16.6cm) 
• WIDTH 20.5" (52.1cm) 
• DEPTH 10.5" (26.6cm) with grille
• MOUNTING Uptilt and Downtilt feet 
• WEIGHT 22.1lbs (10kg) 
• FINISHES Black Ash woodgrain vinyl 
• BUILT FROM 2010

RS-42II Overview

• Remarkable balance of performance and value
• Delivers rich and detailed surround sound
• Highly efficient design produces more output using less energy
• Dual 1" titanium horn-loaded tweeters, dual 4" high-output woofers
• Dimensions: 10" H x 10.75" W x 7.75" D
• Keyhole bracket and dual threaded inserts for easy installation
• Sleek, contemporary cabinet

RS-42II Specifications

• FREQUENCY RESPONSE 62Hz-24KHz ± 3dB
• POWER HANDLING 75W RMS / 300W Peak
• SENSITIVITY 93dB @ 2.83V / 1m
• NOMINAL IMPEDANCE 8 ohms compatible
• HIGH FREQ CROSSOVER 1700Hz
• HIGH FREQUENCY DRIVERS Dual 1" (2.54cm) Titanium diaphragm compression drivers mated to 90° x 60° square Tractrix® Horns
• LOW FREQUENCY DRIVERS Dual 4" (10.2cm) Cerametallic™ cone woofers
• ENCLOSURE TYPE Bass-reflex via dual side-firing ports
• INPUTS Single binding posts
• HEIGHT 10" (25.4cm)
• WIDTH 12.5" (31.7cm)
• DEPTH 7.1" (18cm)
• MOUNTING Keyhole bracket and dual 1/4"-20 threaded inserts
• WEIGHT 11.9lbs (5.4kg)
• FINISHES Matte Black vinyl
• BUILT FROM 2010

SW-112 Overview

Engineered to captivate your senses, the SW-112 subwoofer has you feeling its deep-reaching bass in your chest. Featuring a BASH® Digital Hybrid amplifier and a highly damped, non-resonant woven fiberglass driver, this sonic wonder enhances any speaker system and blends seamlessly with your décor.

• Fills any room with high-powered bass
• Highly efficient design produces more output using less energy
• Dimensions: 16" H x 14.5" W x 19" D
• Stylish, compact subwoofer looks as good as it sounds

SW-112 Specifications

• FREQUENCY RESPONSE 26Hz-120Hz ± 3dB 
• SENSITIVITY 106dB @ 40Hz 
• MAX ACOUSTIC OUTPUT 116dB @ 30Hz 
• AMPLIFIER POWER FTC Rated Power: 300 watts continuous @ <2% THD / Dynamic Power*: 600 watts 
• DRIVE COMPONENTS 12" (30.5cm) Active non-resonant Woven Fiberglass driver 
• AMPLIFIER BASH Digital Hybrid class-AB 
• ENCLOSURE TYPE Bass-reflex via front-firing slot port 
• INPUTS L/R Line-level RCA jacks, L/R High-level speaker binding posts, WA port 
• OUTPUTS None
• HEIGHT 16" (40.6cm) 
• WIDTH 14.5" (36.8cm) 
• DEPTH 19" (48.3cm) 
• WEIGHT 46lbs (20.9kg) 
• FINISHES Black pica
• VOLTAGE 100-120V / 220-240V~50/60Hz 3.15A (Auto-voltage switching) with 1 Watt standby 
• EXPORT VOLTAGE NA, EU, CCC 
• BUILT FROM 2010

AVR-2311CI Features

• 105 watts per channel x 7 channels 8 ohms
• Dolby TrueHD, Dolby Digital Plus, Dolby Digital Surround EX, Dolby Pro Logic IIz decoding
• DTS-HD Master Audio, DTS-HD High Resolution, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS Neo:6 decoding
• HDMI 1.4a includes 3D pass-through compatibility; Audio Return Channel
• Analog video to HDMI upconversion, with 1080p 24Hz/60Hz HDMI pass-through
• Audyssey MultEQ automatic room acoustic measuring and correction system
• Audyssey Dynamic Volume, Audyssey Dynamic EQ
• HD Radio
• iPod and iPhone Direct Play via USB
• Comes with 3 years P&L warranty