Harman Kardon AVR 3600 5.1 3D Home Theater Bundle Package featuring Klipsch Speakers

Harman Kardon AVR 3600:

The Harman Kardon AVR 3600 is the perfect addition for consumers looking to add high-quality audio to new high-definition video sources with the ease of a one-wire connection. Home theatre enthusiasts will enjoy access to all the latest audio features (including Dolby®, DTS® and Logic 7 processing), the flexibility of separate components and high-quality Faroudja DCDi Cinema™ video processing.

Highlights

Key Specifications

• Audio section – continuous average power (FTC), (stereo mode): 70 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, both channels driven; (seven-channel surround-sound mode): 130 watts per channel into 6 ohms @ 1kHz, <0.1% THD, one channel driven; 55 watts per channel into 8 ohms @ 20Hz – 20kHz, <0.07% THD, all channels driven; high instantaneous current capability (HCC): ±35 amps
• Tuner – usable sensitivity: IHF 1.3µV/13.2dBf; THD at 1kHz with 100% modulation (mono): 0.2%; (stereo): 0.3%; FM adjacent-channel selectivity: ±400kHz, 70dB; ultimate (maximum) S/N ratio (measured at 1mV RF input level), (mono): 70dB; (stereo): 68dB
• Dimensions (H x W x D) and weight: 165mm x 440mm x 382mm, 13.4kg

Power

• 130W x 7 into 6 ohms, 1kHz, at <0.1% THD, one channel driven
• 55W x 7 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously
• High-current (±35 amps), ultrawide-bandwidth (10Hz – 100kHz) amplifier design Surround-Sound Processing
• Full suite of Dolby surround-sound decoding, including Dolby TrueHD and Dolby Digital Plus using an advanced Cirrus Logic® CS 49700 32-bit DSP processor
• Dolby Volume technology
• Full suite of DTS modes, including DTS-HD™, DTS-HD Master Audio, DTS-ES® 6.1 Discrete & Matrix, DTS Neo:6® and DTS 96/24™
• Dolby Pro Logic® IIx (Movie, Music and Game modes) surround sound
• Harman -exclusive Logic 7 Movie, Music and Game surroundsound processing in 5.1 and 7.1 channels
• Headphone and Virtual Speaker surround-sound modes
• Five- and seven-channel Stereo, Hall and Theater surround-sound modes
• 192kHz/24-bit DACs
• Compressed music tools improve playback quality of any compressed audio stream

Connectivity

• Four HDMI 1.4a inputs with 3-D support and one HDMI output with 12-bit Deep Color and xvYCC pass-through
• Two assignable, wide-bandwidth (50MHz), HDTV-ready component-video inputs and one output
• Connects to the harman kardon-engineered The Bridge III docking station for playback, control and charging of iPod and iPhone devices
• Subwoofer output for direct connection to a powered subwoofer
• Four A/V inputs, plus two audio-only inputs
• Eight-channel direct inputs for use with external surround-sound decoders
• Convenient front-panel audio/video input for use with video games or portable players
• Six digital inputs (two optical and two coaxial on rear panel, and one optical and one coaxial on front panel)
• One coaxial digital output on rear panel
• USB port for firmware upgrades
• IR remote extension jacks for control of the amplifier when placed in a cabinet

Ease of Use

• HDMI 1.4a with 3-D support for full compatibility with all 3-D formats from Blu-ray Disc™ players or satellite and cable set-top boxes
• HDMI with audio processing and Faroudja DCDi Cinema video processing with upscaling to 1080p
• Adjustable A/V sync delay
• EzSet/EQ equalization for quick and accurate system setup
• FM stereo/AM tuner with 30 presets and direct-access tuning
• Quadruple-crossover bass manager
• Wide range of low-frequency crossover points (40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz) available
• Full-color, high-definition, graphical on-screen interface, including HDMI and component video
• Programmable power-up volume
• Multiroom audio
• Surround-sound back amplifier channels configurable for use as second-zone amplification
• Seven-device, preprogrammed system remote control